1.
Tractors 1969 and older or continuous production models.
2.
All Tractors must have wheelie bars for safety. No devises hook
ring with 3” hole.
3.
Weights: Farthest most point cannot be more than 11 feet forward
from center of rear axle.
4.
Tires & Rims: Maximum tire size 2 sizes width over factory
option specifications; any rim width. No steel wheels, Two wheel drive only, No
duals. Cuts allowed on tires.
5.
All tractors must have a positive throttle stop with a working
governor in the stock location.
6.
Speed: includes any gear, any speed and shifting of T-A’s are
allowed.
7.
Tractors manufactured to use diesel fuel only cannot be converted
to gas or LP. No turbo's or 4 wheel drive.
8.
Tractors must have the stock appearing engine, frames,
transmission, rear end and axle housing or manufacturer’s replacement.
9.
Enhanced electrical systems permitted in all classes.
10.
Any agricultural carburetor allowed. Number of barrels, throats,
venture, etc must be that of the manufacturer for that make. Exception: John
Deere may run updated (duplex) heads, manifolds and carburetors stock or
manufactured replacement manifolds permitted.
11.
No increased height in any tractors (i.e.; deck plates, shims,
girdles) except for stock gaskets
Weight Classes for Super
Improved 3000-3500-4000-4500-5500-6500-7500-8500-9500
*See General Rules That
Apply to All Tractors
